SHENZHEN GOLDANTELL TECHNOLOGY CO.,LIMITED
Shenzhen Goldantell Technology Co.,Limited Quality is our culture!
Add to Cart
Deluxe Straight Arm Advertising Boom Barrier Gate RFID Acess Heavy
Duty Waterproof IP54
Advertising Boom Barrier Specifications:
Model | GAT-P43 |
Working Temperature | -40℃～+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 58kgs |
Speed | 3S,4S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP54 |
Model Selection and Differences:
Boom type | Boom Length(L) | Diameter of the spring(mm) | Note | |
Straight boom | 6M≥L≥5M | 5.5/4.5 | ||
| 5M≥L≥4.5M | 5.5 | Dispatching 4.5 | |
| 4.5M≥L≥3M | 4.5 | Dispatching 4.5 | |
Straight boom adhesive tape | 5M≥L≥4M | 4.5M≥L≥3M | 5.5/4.5 | Dispatching 4.5 |
| 4M≥L≥3M | 3.5M≥L≥3M | 4.5 | Dispatching 4.5 |
Folding boom | 6M≥L≥5M | 6.5/4.5 | ||
| 5M≥L≥4M | 5.5/4.5 | ||
| 4M≥L≥3M | 4.5 | ||
| Two fence boom | 5M≥L≥4M | 6.5/5.5 | |
Fence boom | 4M≥L≥3M | 5.5/4.5 | ||
| Three fence boom | 4M≥L≥3M | 6.5/5.5 | |
| 3M≥L≥2M | 5.5/4.5 | ||
Functions & Features:
1) Manual release
2) Machine core with compression spring, effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photoelectricity limit switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function (optional)
9) Support the external and internal VEHICLE LOOP DETECTOR (optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)
Common problems & solutions:
Common problem | Analysis | Solution |
When motor running, the boom does not work. | 1. the key-pin of main shaft of motor drops | 1. open the motor and refix the key-pin |
The arm vibrates during moving-down or reaching its horizontal position | 1. Non-balance caused by weak spring tension; |
|
The arm stops during movement. | 1.wrong adjustment of limit switches | |
Anti-collision fails | ground sensor or IR wire damages or wrong connection |
|
| Wrong adjustment of limit switches |
|
