SHENZHEN GOLDANTELL TECHNOLOGY CO.,LIMITED
Shenzhen Goldantell Technology Co.,Limited Quality is our culture!
Add to Cart
Bus station RFID Flap Barrier Gate with counter system and QR code / Bar code reader
Flap Barrier Gate Specifications:
|
Item |
GAT-203-1( single motor )
|
|
Housing material:
|
304 stainless steel/316 stainless steel |
|
Working voltage:
|
AC220±10%V 50±10%HZ |
|
Retractable arm length:
|
265mm |
|
Time of opening:
|
0.6 second |
|
Passage width:
|
≤600mm |
|
Size
|
1200mm /1400mm(L) * 280mm (W) * 980mm (H) |
|
Reset time after break down:
|
10 seconds |
|
Direction:
|
single or bi-directional (optional) |
|
Drive motor:
|
DC 24 V brush motor |
|
Number of led lamp:
|
1pcs or 3 pcs |
|
Input interface:
|
+12V level signal or pulse width>100 ms
|
Features of Flap Barrier Turnstile:
1. working method can be set by the buttons on the main panel
2. This model is double wing flap gate, low noise, smaller casing, save space
3. Anti-pinch by mechanism and sensor If there is block during return of gate, motor stops working automatically. Reset again after a default delay, the force 2Kg.
4. Anti-illegal in, anti-intrusion, auto close for reverse direction.
5. Anti-collision, gate closes when no valid signal is given.
6. Gates can be synchronous
7. uto-reset. If not go through in a preset time, pass right would be cancelled automatically. (1-60s adjustable), default time is 10s.
8. Reset function by photocells,Anti-pinch function by photocells, ( 3 or 5 pairs sensors)
9. Compatible with Access control system, consumption system, ESD system, E-ticket system and so on.
10. One way or two way control
11. Unit can be controlled and administered by remote control
application place :
