SHENZHEN GOLDANTELL TECHNOLOGY CO.,LIMITED
Shenzhen Goldantell Technology Co.,Limited Quality is our culture!
Add to Cart
Electromagnetic turnstile mechanism high quality scanner code qr door open for university channel
Flap turnstile barrier Series are widely suitable for indoor & outdoor application. It is optimized affordable solution for Airport, Lobby, commercial office building, factory, bus station, game park, colleges and banks. But the Optical Turnstile with colorful led light is NOT advised to be installed outdoor or near sea side.
—SAFETY IS PRIORITY
1. Safety function(anti-pinching). By default flap wing will auto- reverse if IR sensor detected obstacle within the flap wing area. This avoid flap wing to accidentally hit onto to user. Can adding green/red/blue light lining effect along the edge of the flap wing to ensure flap wing is easily visible.
2. Anti-tailgating/ anti-retrogradation function: Flap wing can be set to pause if IR sensor detected obstacle nearby wing area during closing. Flap will resume closing once the obstacle is removed. This is to make it very difficult for following user to tail gate the first user.
3. Auto close timer protection. Flap will auto close if there is no pedestrian pass through after the delay time elapsed. This prevent unauthorized user from sneaking into the building.
| Cabinet dimension | 1200 (L) x 300 (W) x 1000 (H) mm |
| Cabinet material | 304 stainless steel (316 ss can be custom-made) |
| Switching power supply | AC220±10%V 50Hz or AC110±10%V 60Hz |
| Flap opening/closing time | 0.6-0.8s |
| Stretching-out flap length | 285 mm for single wing; if for the disable access, can lengthen |
| Access mode | single in/out or Bidirectional |
| Optimal flow rate | 40 persons/min (open), 25-30 persons/min (closed) |
| Reset time after break down | default 10s,can be changed to fit different demands |
Installation Site
Name: Reading / scanning Area; Reader type: rfid cards + QR code
1, Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
2, After-Sales Service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
3, OEM Service
* Machine size
* Print company logo
* customize access readers.